Encoder-controlled self-locking unit 24V + batteries - max. weight 800kg
(drag speed max. 13 m/min)
ELECTROMECHANICAL UNIT WITH A 24V MOTOR
The automation is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder
with an in-built:
- electronic programmer;
- 433MHz FM receiver;
- slot-in battery charger;
- NiMH batteries.
The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages. The
the menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled
(during holiday periods) either from the menu or by means of a
radio channel. The appliance is fitted with a safe and secure manual
release system activated by a personalised key.
brand |
Cardin
|
Model |
SLX824CB
|
Type |
SLX824CB
|
Power supply |
230Vac
|
frequency |
50Hz
|
Power consumption |
200W
|
Duty cycle |
70%
|
Displacement speed |
13m / min
|
Maximum torque |
57Nm
|
operating temperature |
-20 °… + 55 ° C
|
Degree of protection |
44IP
|
Motor power supply |
24Vdc
|
Maximum power consumption |
110W
|
Power consumption |
3A
|
MHz |
433, 868
|
Number of channels |
4th
|
Number of functions |
8th
|
Number of storable code numbers |
300/1000
|